 |
| These 3mm plywood cutouts are the same size as stations 7 and 12. I used them to create stands to support the kayak with the strips on. |
 |
| These are the original stands made to hold the stronback. |
 |
| While making things - Fairing board made from scrap pine. 80 grit glued to the base. |
 |
| My Japanese Pull Saw arrived - This Axe handle should do the job. |
 |
| Handle Added - works very well - cuts through cedar like butter. |
 |
| Kayak flipped - temporarily supported on old 64mm fire hose. This is helpful while the stands are changed. |
 |
| New stand supporting the kayak near station 7 |
 |
| New Stand supporting the kayak near station 12. |
No comments:
Post a Comment